Brand    RUNCO CL 710 LT

 
  All Original Boxes, Packaging, Manual and Accessories.

   Projector = 16" Wide x 14" Deep x 5" High         
 
    
 
Shipping Information:
 $ ???  Fed Ex Ground  (USA)  
                      Shipping   & Handling Fee
                         "Double Boxed"

   Payment Method = PayPal or Money Order

         Good Luck!   Please Contact with any further questions

 
 Reason for Selling: Sold wrong equipment product for our project needs by a Northwest Runco Dealer that NO longer exists

      Actual Photos Below: 
Click Here for Actual HQ Photo:  RuncoHQ.jpg      ( Will open in New Window | 750x685, 165KB )
 
 

 
 

Digital Reflection™ CL-710/CL-710LT Projector Specifications
Projector Type:
 
Digital Light Processing™ (DLP™) Single HD-2+ DMD™ Chip
Native Resolution:
 
1280 x 720 (16:9)
Aspect Ratios:
 
4:3, Letterbox, 16:9 Anamorphic, Virtual Wide
Video Standards:
 
NTSC, PAL
DTV Compatibility:
 
480p, 720p, 1080i
Scan Frequency:
 
Horizontal: 50-68 kHz
Vertical: 50-85 Hz
Picture Size:
(16:9 Screen):
Recommended Width: 72-96 in.
Maximum Width: 200 in.
Throw Distance:
(Factor x Screen Width):
CL-710: 1.40:1 to 1.60:1
 
Light Output: 1000 ANSI Lumens*
CSMS** Specifications: Home Theater Calibration: 489 ANSI Lumens; 18.1 Foot-Lamberts (fL)
Contrast Ratio: 1800:1
CSMS** Contrast Ratio: 156:1
Lamp: 210W
Lamp Life: 2000 Hours @ 6500° Kelvin
Inputs: (1) Composite Video, (1) S-video, (1) RGB/Component (via BNC), (1) RCA Component Video, (1) DVI w/HDCP, (1) RS-232
Memories: 18 memories
12V Output: Max. 250 Amp, active when the projector is on
Power Requirements: 100-240V AC, 50/60 Hz, 310W
Operating Environment: 41° - 95° F, (5° - 35° C), 20% - 80% Humidity (non-condensing)
Dimensions: (w/out feet) Width: 16 1/8 in. (410.16 mm)
Depth: 14 1/2 in. (370 mm)
Height: 5 1/4 in. (132.2 mm) / (w/feet) 5 3/4 in. (146 mm)
Weight: 22 lbs. (10 kg) (includes lens)
Regulatory Approvals:
 
UL, CSA, GS-TUV, CCIB, CB, FCC, CE, VCCI and C-Tick
ANSI Lumen and CSMS Specifications
*ANSI Lumen specification:
 
This is the typical projector luminosity (brightness) specification found in most sales literature. This measurement is included in RUNCO literature to allow for direct comparison with other manufacturer's projectors. These measurements can be taken at 9,000 to 13,000°K to get expected performance data when the projector is used in professional, commercial, and industrial displays.
**CSMS Home Theater Calibration ANSI Lumen Specification:
 
These measurements are taken from the projector as setup in a home theater environment. The projector is calibrated to ISF specifications including setting the color temperature to 6500°K, the standard for reproducing video.
**CSMS Home Theater Calibration foot-Lambert (fL) Specification:
 
This is the unit of measurement used in commercial movie theaters to express image brightness. The Society of Motion Picture and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema theaters using DLP™ Technology. The foot-Lambert is dependant on screen size, screen gain, and projector light output.

All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter and Minolta LS-100 Light Meter, Video Essentials test DVD, and a Stewart Filmscreen StudioTech 130, 1.3 gain, 72-inch wide screen. The projector is calibrated to a color temperature of 6500°K and has a minimum of 150 hours of usage.
 

           Official Runco ™ Links:   
       
           CL 710 | 710 LT Data Sheet    .pdf

              
           CL 710 | 710 LT Manual       
  .pdf